Patricia Carr Obituary, When Is Insulin Covered By Medicare Part B Cvs, What Is Dtn Mean In Texting, City Golf Championships, Wells Fargo Fair Fund Payout Amount, Articles H

We hope you learned something new about this tool today! You dont want to turn too far up, or too far down. The AutoBlade for Cameo 4 can make an adjustment using only a few clicksthe first click turns the blade to zero and the following clicks set the blade at the depth indicated in Silhouette Studio. If that cut line is off to the side or top or bottom the same tiny amount on every image, then Calibration can help adjust for that. You will need to move the test cut to the exact location you want it to cut on your material. Glad I could help. The Curio never cut as perfect as that photo with the funny octupuss shows (is that adhesive backed foam?) You should see a slight black rim. Start with the Blade depth. Click here and use code 10OFF to get 10% off regular priced items (bundles and promo items not included). Thanks, Jeanette! This does not allow you to use blade settings above 20 but you state its for the Kraft 3mm blade. I have seen it used in the Silhouette Cameo but its not recommended because thick materials are not recommended in the Cameo. From Silhouette Studio's Send panel press Send and the cutting will begin. I think these blades have a flaw! WELL DONE ON A AWESOME LESSON. If you are using an Auto Blade and the cut settings are not working for you, you can change the blade depth by pressing the arrows on either side ofthe dial. This is where test cuts come into play. If the blue rim is showing, reference the blue row of numbers (1-10). Turn the knob clockwise so the blade locks into place. Make sure there's no gap. Let's say you pick Glossy Vinyl as the material. and I am disappointed because cutting eva foam was, for me, the most interesting feature the Curio advertised it had. The flattened circle matches the cap shape on these older blades. Silhouette School Blog, Silhouette School Inc and MAV Creatives LLC are not associated with Silhouette America. And I know that using to much pressure can cause ragged edges on intricate designs. Copyright Silhouette School 2016. You definitely need to set the blade depth before you load the blade. You can set custom material settings in the Cut Settings Window (click on the plus symbol to add a material), but as I mentioned before, you currently cant set a deep-cut blade depth (I understand that feature is still to come).